interface tunnel-te20
ipv4 unnumbered Loopback0
priority 4 4
signalled-bandwidth 750
autoroute announce
!
destination 1.0.0.122
path-option 1 explicit name ASBR2 attribute-set BW
path-option 2 dynamic
mpls traffic-eng
!
attribute-set path-option BW
signalled-bandwidth 750 class-type 0
#didnt work for me - use signaled bandwidth under interface
#didnt work for me - use signaled bandwidth under interface
explicit-path name ASBR2
index 1 next-address strict ipv4 unicast 1.0.0.101
index 2 next-address strict ipv4 unicast 1.0.0.121
index 3 next-address strict ipv4 unicast 1.0.0.122
index 4 next-address strict ipv4 unicast 1.0.0.102
index 5 next-address strict ipv4 unicast 1.0.0.112
Cisco IOS XE
interface Tunnel10
ip unnumbered Loopback0
tunnel mode mpls traffic-eng
tunnel destination 1.0.0.132
tunnel mpls traffic-eng autoroute announce
tunnel mpls traffic-eng priority 6 6
tunnel mpls traffic-eng bandwidth 750
tunnel mpls traffic-eng path-option 1 dynamic
ip explicit-path name PE3 enable
next-address 1.0.0.102
next-address 1.0.0.132
next-address 1.0.0.101
next-address 1.0.0.133