Monday, 30 November 2015
Palo Alto Firewall - View if there are no pending jobs (like commit)
admin@FW01(active)> show jobs all
Enqueued ID Type Status Result Completed
--------------------------------------------------------------------------
2015/11/07 20:14:04 1 AutoCom FIN OK 20:15:30
Palo Alto Firewall - Initiate failover on Active/Standby pair
Run this CLI command on standby firewall:
> request high-availability state suspend
Palo Alto Firewall - View MAC address for each interface
Some time is necessary to find out MAC address of interface on firewall to troubleshoot connectivity.
On Palo Alto firewall log in to CLI and issue command:
admin@PA-200> show interface all
--------------------------------------------------------------------------------
ethernet1/1 16 1000/full/up 00:1b:17:00:01:10
ethernet1/2 17 ukn/ukn/down(power-down) 00:1b:17:00:01:11
ethernet1/3 18 1000/full/up 00:1b:17:00:01:12
ethernet1/4 19 ukn/ukn/down(autoneg) 00:1b:17:00:01:13
ethernet1/7 22 1000/full/up 00:1b:17:dc:b5:16
ethernet1/8 23 1000/full/up 00:1b:17:dc:b5:17
vlan 1 [n/a]/[n/a]/up 00:1b:17:00:01:01
loopback 3 [n/a]/[n/a]/up 00:1b:17:00:01:03
tunnel 4 [n/a]/[n/a]/up 00:1b:17:00:01:04
Subscribe to:
Posts (Atom)
1.1 Switched campus 1.1.a Switch administration 1.1.a i Managing MAC address table Show Commands: Switch#show mac address-table ? address ...
-
After changing configuration on Juniper SRX and trying to save config with commit cli I have receive error below: root# commit [edit]...
-
Some time is necessary to find out MAC address of interface on firewall to troubleshoot connectivity. On Palo Alto firewall log in ...